Menu
  • FREE Mainland UK Delivery on all orders over £35
  • 0333 77 22 111 Mon-Fri: 9.00-17.30
Lumilife

LED Strip RGB Amplifier

SKU: RGB-AMP

£ 6.99 In Stock

£6.99

(See all 11 reviews)

LED Strip RGB Amplifier

The RGB Amplifier is used in instances where you may wish to control numerous RGB LED Strips collectively from one central controller.



  • 12v Constant Voltage Power Supply Needed

  • Compatible with LUMiLiFE Range

  • 3 Year Warranty


Stock Status: (over 100 in stock)

FREE Economy Delivery available - on orders over £35 (UK Mainland only)

Description

Control RGB LED Strips

The RGB Amplifier is used in instances where you may wish to control numerous RGB LED Strips collectively from one central controller. It simply boosts the original control signal, continuing the desired light effect or colour pattern.

RGB amplifiers can only be installed in parallel, not in series. Please see the diagram below for typical installation. For more information please contact our help team.

Installation information

Despite the Central Controller being controlled via a Remote Frequency (RF) remote, be advised that in order for the RGB Amplifier(s) to work they need to be wired into your circuit and, in each instance, will also require a 12v Constant Voltage Power Supply (power capacity dependent on the LED Strip it will be powering).

3 year LUMiLiFE warranty

On selected LUMiLiFE products, we offer an automatic 3 year warranty. This entitles you to unlimited replacements from the original purchase throughout the warranty period. If your original purchase is no longer available, a new replacement with the latest equivalent model will be offered.

Product dimensions

Height: 65mm - Width: 105mm - Depth: 25mm

Specifications

SKU RGB-AMP
Dimmable No
Warranty 3 Year
Height (mm) 105
Width (mm) 65
Depth (mm) 25
Certifications
CE
RoHs

Lumen

Since LED light bulbs are designed to use less energy than halogen spots, wattage is not a reliable way to gauge how bright the bulb is. Brightness is measured in Lumens.

With LED spotlights there is more to consider than just a direct Lumen comparison with the halogen equivalent. The superior light quality given off by LEDs and much lower bulb degradation rate over time must also be taken into account. This is why the stated Lumen output for an LED spotlight is often less than that quoted for a halogen spot bulb it replaces.

Beam Angle°

The beam angle is how wide the beam is spread. If you have a very narrow beam angle your light will be projected like a handheld torch whereas if you have a wide beam angle it will be much softer and spread like a traditional bulb. Wide beam angle are best for living areas such as living rooms, dining rooms and bedrooms where you are looking for a softer light and narrow beam angles for targeting specific areas or for decoration.

Power Consumption (W)

The wattage is the value given to the energy consumed by the light bulb itself. So, a 50-watt halogen spotlight bulb will use 50 watts of power. If you have 6 x 50-watt halogen spots in your kitchen then you will be using 300 watts of power. If you were using replacement LED lights at 4 watts each you would be using 24 watts of power, resulting in huge energy savings.

Input Voltage

This is a measurement of the volts required to operate the bulb. The standard for the UK is 240 volts. This means that you can plug these directly into existing fittings without changing any of the electrics.

Height (mm)

The size determines the diameter and the length of the bulb. In most cases the bulbs are a retro-fit, which means they are a direct replacement for their halogen equivalent.

Width (mm)

The size determines the diameter and the length of the bulb. In most cases the bulbs are a retro-fit, which means they are a direct replacement for their halogen equivalent.

Depth (mm)

The size determines the diameter and the length of the bulb. In most cases the bulbs are a retro-fit, which means they are a direct replacement for their halogen equivalent.

Wattage Replacement

This details what this LED bulb is a replacement for in terms of standard halogen bulb wattage. This allows you to easily make a comparison when replacing your existing halogen bulb, to ensure you get a similar light quality and brightness from your new LED bulb

Average Life in Hrs

Manufacturers will give lifetime claims in multiples of 1000 hours. One thousand hours is equivalent to about 6-months use when the bulb is on for 4 hours per day. A traditional halogen spotlight bulb is expected to last about one year (2000 hours) where as an LED will last between 30,000 and 50,000 hours - that’s between 15 and 25 years! Switching to LEDs means you may never have to change your light bulbs again.

Base Type

This is the fitting of the bulb, described by a letter/number code. You can find out what your fitting is by looking on the base of the bulb you are replacing or the packaging of your existing bulb.

Dimmable

Dimmable LED bulbs are only compatible with a dedicated "Trailing Edge" dimmer switch that reduces the current flow. Your bulbs will not work effectively if used with the conventional "Leading Edge" dimmer switches that operate with a higher current flow.

When ordering dimmable LEDs please ensure you have an LED-compatible Dimmer Switch.

Protection Rating

The IP rating is an international classification system for the sealing effectiveness of enclosures of electrical equipment against the intrusion into the equipment of foreign bodies (i.e. tools, dust, fingers) and moisture. IP65 for example, is dust tight and water resistant.

Colour Rendering Index (CRI)

Measured on a scale from 0 to 100 percent, the colour rendering index (CRI) indicates a bulb's ability to make reds, greens, and all other shades look just the way they should. Simply put, the higher the CRI, the more accurate an object's colour would look under the light source.

Warranty

We're so confident in the quality of our bulbs that we offer an extended 3 Year warranty

Reviews

We use Feefo which is an independent review company who monitor the happiness of our customers in regard to their shopping experience. This not only allows us to see how we are doing in terms of delivering a fantastic level of service to our customers but also means that we are more transparent.

This product has 11 customer reviews.

3/5
LED above and below kitchen cupboards. Difficult to solder. You need to have adaptors instead of the need to solder.
05th April 2018
5/5
good quality product at a price that's much cheaper than elsewhere
07th November 2015
5/5
The product will be used to extend RGB LED lights around garden steps
07th May 2015
5/5
Ultimately didn't need it, but the brief test I did before returning it told me that it worked well and was again easy to connect.
30th April 2015
3/5
okay
07th March 2015
5/5
As I was installing a long length of led strip light I needed a rgb amplifier to ensure that it was all powered correctly. This amplifier is perfect for the job. It is in a metal case which gives it better protection compared to the plastic ones. Very well made and highly recommended.
06th December 2014
5/5
A quality product at a good price.
14th November 2014
5/5
needed as part of RGB LED Strip light.
24th June 2014
4/5
I am using it with an Arduino Uno and I am able to dim the LED strips.
27th April 2014
5/5
Used with the 2.5m 50/50 large high powered tape led.
13th April 2014
5/5
Looks like it'll do the job. Seems well made.
10th November 2013


(Showing the most recent 100 reviews)

Delivery, Warranty & Returns

Delivery details

We offer FREE economy 2-3 day delivery on orders over £35. All paid orders are shipped via one of our Next Working Day or 48hr delivery services. If ordered before 16:00, Monday - Friday, your order will be despatched the same day unless otherwise stated*. Items are not despatched on weekends.

We know getting your items delivered safely and on time is critical. That’s why we’ve selected the best delivery services available.

DPD Next Day 1hr timeslot - £5.99*

Choose our Next Day delivery service with the reassurance of market-leading tracking and notifications. There are a range of delivery options to choose from: Signature at a specified address, to a neighbour, delivery to a safe place or ServicePoint

*price per 30kg

Yodel 48hr - £2.99

The award-winning distributors have a 99% delivery success rate, and have a dedicated customer support team that'll happily help with any questions you may have.

We also offer Saturday delivery for telephone orders only. There is a cost of £10 for this option.

Yodel Economy - £FREE On orders over £35

The award-winning distributors have a 99% delivery success rate, and have a dedicated customer support team that'll happily help with any questions you may have.

FREE 3 Year Warranty

On selected LUMiLiFE products, we offer an automatic 3 year warranty. This entitles you to unlimited replacements from the original purchase throughout the warranty period. If your original purchase is no longer available, a new replacement with the latest equivalent model will be offered.

Please note: Clearance items only come with a 2 year warranty unless otherwise stated.

Returns Policy

We offer a 30 day, no-quibble returns or replacement policy, because we want you to be totally satisfied with your purchase.
If you're unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it.
We will pay for your return postage on a faulty item as long as you send it using Royal Mail 2nd class recorded delivery and within 30 days of receiving it.

* Some items have a different dispatch date. This is marked on the product page and also in the cart